Jump to content
Please Login

lacanteen

SUPPORTER
 View Profile  See their activity

  • Posts

    5,871

  • Joined

  • Last visited

  • Days Won

    551

lacanteen last won the day on April 12

lacanteen had the most liked content!

7 Followers

Profile Information

  • State
    Louisiana
  • Vending Type
    Full Line
  • Vending Since
    1981

Recent Profile Visitors

4,940 profile views

lacanteen's Achievements

Proficient

Proficient (10/14)

  • Conversation Starter
  • Reacting Well Rare
  • Dedicated Rare
  • Very Popular Rare
  • First Post

Recent Badges

2.7k

Reputation

  1. lacanteen started following Nayax VPOS Stuck on Logo , AP113 bill validator upgrade question , No power to bill acceptor, coin collector or display selection and 7 others
  2. lacanteen
    Go with the 24VAC VN2502 and the proper harness to interface to the board. In the future, you can convert it to MDB with just a harness change. A 110VAC is already obsolete
  3. lacanteen
    Here's what the connector looks like. It's about the size and shape of an AA battery.
  4. lacanteen
    Temperature adjustment is done with a small screwdriver through a hole in the front of the box. That machine is over 20 years old
  5. lacanteen
    Have they tried adjusting the thermostat? It's in a power box mounted to the front of the cooling unit
  6. lacanteen
    I just looked at the Coke programming manual. There are no provisions to activate/deactivate that feature.
  7. lacanteen
    Check the coin mech. There's likely a dime fell through the space above the dispenser and is shorted to the board in the mech. If you laid the machine down when moving it I am certain this is what happened
  8. lacanteen
    Since you are in Canada with large denomination coins, a card reader would be prudent.
  9. lacanteen
    We have 10 or so of the 365 Pico devices on coolers in small locations. They have been relatively trouble free. On vending, we are 100% Nayax.
  10. lacanteen
    Here's the manufacturer. https://vendnetusa.com/
  11. lacanteen
    Motor scan depends on the software revision. If your board goes into service mode when you open the door, press C then close the door to get motor scan. If you manually have to press the service mode button, press 1 time to enter service mode then close the door, or press and hold the door switch.
  12. lacanteen
    In Nayax Core, go to operations/machines, click search to pull up all readers, then click on that reader. The 3rd line on the general tab is communication. Click that open then you'll see the carrier. Here's a screen shot:
  13. lacanteen
    Make sure the door switch is working and triggers a motor scan when you close the door.
  14. lacanteen
    The Nayax screen is usually a connectivity issue. Check your signal strength, it should be ideally higher than 18. Replacing/relocating the antenna could help. Is the antenna on the outside of the machine? If the carrier is AT&T, it will respond well to a high gain antenna.
  15. lacanteen

    Memes

    lacanteen replied to The Mage's topic in The Golpher Hole

  16. lacanteen
    You likely need to link the Nayax reader to your Parlevel point of sale.
×
×
  • Create New...