Jump to content

Revolution 650


Square

Recommended Posts

Anyone running these???

 

 

 

I bought a couple on location, one or two are doing okay ($50 per month) all others are boat anchors.

 

I'm replacing a couple locations with double beavers I have in storage.

 

 

I think the $2 vend amount is too high for 4oz, was thinking salted nuts at $1

 

 

What do you all think?

 

Link to comment
Share on other sites

Wow.  Not many folks walk around with $2 in quarters in their pocket.

 

I'm not the biggest PMM fan, but why not try some PMM for $1 rather than salted nuts?

PMM will be less hassle and likely more popular than salted nuts.

And both are at pretty much the same COG last I checked.

Link to comment
Share on other sites

Wow.  Not many folks walk around with $2 in quarters in their pocket.

 

I'm not the biggest PMM fan, but why not try some PMM for $1 rather than salted nuts?

PMM will be less hassle and likely more popular than salted nuts.

And both are at pretty much the same COG last I checked.

 

Canadian $2 coin

 

The vend size is fixed 4oz (so the machine says)

 

I'll test tonight to see how many Peanut M&M it vends

Link to comment
Share on other sites

  • 2 weeks later...

PMM are vending at 24-25-26 on 10 test vends, so $1 would be inline with what my quarter machines are selling at but that's not factoring in the cost of the four oz cups @ $0.04 each

Link to comment
Share on other sites

  • 5 months later...

Square - any idea if it would be possible to ditch the cups and put a capsule wheel into one of these? CL in my area is flooded with these machines, clearly no one is selling any peanuts. If they could vend something else though...

Link to comment
Share on other sites

Square - any idea if it would be possible to ditch the cups and put a capsule wheel into one of these? CL in my area is flooded with these machines, clearly no one is selling any peanuts. If they could vend something else though...

 

it would be alot of work and still have to pretty it up!

 

~cut the steel top to narrow it

~build new plexi wheels dispens caps (current wheel may deaspens 2 ~ never tried yet)

~built inside shoot to fit larger then 1" caps ~ current shoot has an indent to clear coin mech gears

~clen up the exit so kids will not hurt themselfs on the lip designed to hold in the cups

 

They kill it in bars! making new vinyl decals this week for the dark locations

Link to comment
Share on other sites

  • 10 months later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...