Pete Schweddy Posted March 22, 2014 Share Posted March 22, 2014 I am looking at buying an OK gravity hill 2 extreme challenge prize game. Is there anything to watch out for on them? The tower in the middle where it attaches to the machine is kind of flimsy and floppy. I know its suppose to move but its really bouncy and loose. The guy said that the tubes were made of plastic but the new ones are made of aluminum (The tube where the ball drops down for the grand prize). He said it just needs the new piece. Has anyone had to replace this piece? If so how expensive and hard? Thanks Link to comment Share on other sites More sharing options...
havending Posted March 22, 2014 Share Posted March 22, 2014 I would run as it is unless it's broken. GH are still good games in the right location. At the last auction they went for a few hundred. Link to comment Share on other sites More sharing options...
mjacks Posted March 22, 2014 Share Posted March 22, 2014 I have problems with the ball returns on a bunch of ours. They are decent if you get them cheap. Not huge money makers by any stretch. Link to comment Share on other sites More sharing options...
Pete Schweddy Posted March 22, 2014 Author Share Posted March 22, 2014 What do they average if its not too personal? Link to comment Share on other sites More sharing options...
Pete Schweddy Posted March 25, 2014 Author Share Posted March 25, 2014 I just picked one up today for $100 with nothing wrong. I need to get new locks for the front, a add bill validator (didn't come with one), and adjust the coin mech. Where is the cheapest place to get a mars bill validator for this machine? How do you adjust the coin mech the quarter shoot past where they need to drop. Link to comment Share on other sites More sharing options...
Pete Schweddy Posted March 27, 2014 Author Share Posted March 27, 2014 Need help with what I am missing on this coin mech on this gravity hill 2. Link to comment Share on other sites More sharing options...
brmorr Posted March 27, 2014 Share Posted March 27, 2014 Need help with what I am missing on this coin mech on this gravity hill 2. You are missing the actual coin mechs. If you are going with quarters, it should be about $10-20 each and you need 2. Link to comment Share on other sites More sharing options...
Pete Schweddy Posted March 27, 2014 Author Share Posted March 27, 2014 Ok thanks. Do you know the best place to get a bill acceptor for this machine also and what they should run. I think its a mars 2411 or a 2651. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.