Snackland Posted October 21, 2014 Share Posted October 21, 2014 Hello, When I do a motor count on the machine it counts 0. All Harnesses are not damaged and plugged in properly. All motors are plugged in properly. My mother board was fixed a while ago and it hasn't been used until now ( so that should be fine). Im at a loss. Any suggestions? John Link to comment Share on other sites More sharing options...
AZVendor Posted October 21, 2014 Share Posted October 21, 2014 Welcome to the forum, Snackland! It sounds like your board is bad. Seaga doesn't repair the boards nor does anyone else, so who "fixed it?" You can try pricing or test vending but that probably won't work. Are you certain that the motor harness is properly plugged into your board? Link to comment Share on other sites More sharing options...
Growliebusters Posted October 22, 2014 Share Posted October 22, 2014 Hello, When I do a motor count on the machine it counts 0. All Harnesses are not damaged and plugged in properly. All motors are plugged in properly. My mother board was fixed a while ago and it hasn't been used until now ( so that should be fine). Im at a loss. Any suggestions? John Check to see that ALL the harnesses are plugged I tight. These are really bad for no tolerances with the harness. I would be willing to bet that AZ is correct and the board is bad. Are you in Canada or the US? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.