BMash Posted January 9, 2015 Share Posted January 9, 2015 If I have a mars bill acceptor that's an upstacker, can I just install it upside down if the space requires a downstacker? Can the faceplate be flipped? Link to comment Share on other sites More sharing options...
orsd Posted January 10, 2015 Share Posted January 10, 2015 you might get a jammed penny in one is shoved in otherwise, just flip the sticker- very few will care or notice that the insert is at the top Link to comment Share on other sites More sharing options...
AZVendor Posted January 10, 2015 Share Posted January 10, 2015 The Mars validators will work upside down and you'll need to set them to take the bills 4 ways. If you have it set to 2 way acceptance then all the bills would need to be inserted upside down. To mount it upside down you will need the outside bezel to be mounted upside down as well. Because you can't flip the validator bezel you'll need a new label for the front to show which way to insert the bills. They do make a label for the upside down bezel. You can PM me if you need the label. Link to comment Share on other sites More sharing options...
havending Posted January 10, 2015 Share Posted January 10, 2015 The Mars validators will work upside down and you'll need to set them to take the bills 4 ways. If you have it set to 2 way acceptance then all the bills would need to be inserted upside down. To mount it upside down you will need the outside bezel to be mounted upside down as well. Because you can't flip the validator bezel you'll need a new label for the front to show which way to insert the bills. They do make a label for the upside down bezel. You can PM me if you need the label. Spot on Link to comment Share on other sites More sharing options...
BMash Posted January 10, 2015 Author Share Posted January 10, 2015 The Mars validators will work upside down and you'll need to set them to take the bills 4 ways. If you have it set to 2 way acceptance then all the bills would need to be inserted upside down. To mount it upside down you will need the outside bezel to be mounted upside down as well. Because you can't flip the validator bezel you'll need a new label for the front to show which way to insert the bills. They do make a label for the upside down bezel. You can PM me if you need the label. Won't the outside bezel being upside down look "off" ? I don't want to confuse customers. I don't think I'll need the label since I'm sticking it in an old rowe bc35 changer. Link to comment Share on other sites More sharing options...
orsd Posted January 10, 2015 Share Posted January 10, 2015 Many customers simply don't notice Some can't or won't even read instruction stickers Link to comment Share on other sites More sharing options...
BMash Posted January 13, 2015 Author Share Posted January 13, 2015 Thanks for the replies. Also can anyone explain to my why this mars 2611 went for $180: http://www.ebay.com/itm/141531678070?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT When the whole time this was sitting here at $100 each? http://www.ebay.com/itm/Lot-of-2-MEI-AE-2611-U7-Bill-Validator-Bill-Acceptor-Mars-115VAC-/301480198726?pt=LH_DefaultDomain_0&hash=item46319ec246 What am I missing? Link to comment Share on other sites More sharing options...
orsd Posted January 13, 2015 Share Posted January 13, 2015 One is nib other used Link to comment Share on other sites More sharing options...
havending Posted January 13, 2015 Share Posted January 13, 2015 Thanks for the replies. We get them for about 60 Also can anyone explain to my why this mars 2611 went for $180: http://www.ebay.com/itm/141531678070?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT When the whole time this was sitting here at $100 each? http://www.ebay.com/itm/Lot-of-2-MEI-AE-2611-U7-Bill-Validator-Bill-Acceptor-Mars-115VAC-/301480198726?pt=LH_DefaultDomain_0&hash=item46319ec246 What am I missing? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.