Jump to content

Toy N Joy Machines


Hillbilly

Recommended Posts

Are they 5/16? Some victors were ( or are you talking about victors on a t&y rsck) if so A&A might have some as at one time they had victor parts. Also can you drill and tap the locks to 5/16?

They are cam locks that go in the front of the machine. They are the same size as a standard 1/4" lock body wise but the cam portion attaches to the lock with a nut. Using the regular locks puts the cam too deep in the machine to securely fasten it. No they are not the Victors

Link to comment
Share on other sites

I realized I goofed up after I posted, victors were only used on the top. Do you have any key numbers? Do you have a depth measurement? I may have some laying around but don't remember how long the lock body is.

No key numbers.  I bought a rack I happened to see at a yard sale.  I had to drill all the locks.  It appears to be a 5/8"  That is from under the head to the bottom of the cam. Under the head is double stepped. This measurement is the longer step. Hope that makes sense.

 

Been to a couple locksmith places and they can't help. I don't have much in the machines but figured I could make a few bucks on them.  If I can't find locks I will just part them out. If you would PM me a cell phone number I will send you pics of the locks.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...