mppuzzled Posted April 2, 2016 Share Posted April 2, 2016 Just purchased my first 50 cent machine. Had a box of bouncy balls I would like to fend from it. Problem is that every once in awhile 2 or 3 bouncy balls come out on a single turn. I've tried to move one of the springs over to the left and tuck it under the screw but still am having the same problem. I will post pictures so you can see. Any suggestions? Do I need to use another machine or different parts to vend these bouncy balls? Link to comment Share on other sites More sharing options...
drvend1@yahoo.com Posted April 3, 2016 Share Posted April 3, 2016 You need use a riser Link to comment Share on other sites More sharing options...
mppuzzled Posted April 3, 2016 Author Share Posted April 3, 2016 You to use a riserWhat's that drvend? Sorry but I did not understand what you said about a riser. Sent from my SM-N915V using Tapatalk I need to get a riser? Where can I buy one of those? Sent from my SM-N915V using Tapatalk Link to comment Share on other sites More sharing options...
mppuzzled Posted April 3, 2016 Author Share Posted April 3, 2016 What kind of machine is this? So I can look for a riser? Sent from my SM-N915V using Tapatalk Link to comment Share on other sites More sharing options...
musser Posted April 3, 2016 Share Posted April 3, 2016 It's a northwestern, you need a larger baffle to take weight off the springs Link to comment Share on other sites More sharing options...
mppuzzled Posted April 3, 2016 Author Share Posted April 3, 2016 I'm new to all this musser. Could you send a link on where to get one Sent from my SM-N915V using Tapatalk Link to comment Share on other sites More sharing options...
QuikVend Posted April 3, 2016 Share Posted April 3, 2016 Aaglobal.com will have replacement parts for that machine. http://www.aaglobal.com/bulk-vending/accessories-equipment/machine-parts.htm Link to comment Share on other sites More sharing options...
heritagevending Posted April 12, 2016 Share Posted April 12, 2016 It is a Northwestern but you can get parts from AA if you prefer. Tell them you need a baffle and a ball brush housing. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.