dwr136135 Posted August 13, 2016 Share Posted August 13, 2016 Newbie here, Hi guys! I have couple new VS3000's, it seems impossible to get the pole into the base and machine all the way without cracking something. I can barely get them started. Should I use a dremel to make the openings a little looser? The poles are not rusted and are the proper parts for the machines. Any help is greatly appreciated. Sent from my LGLS740 using Tapatalk Link to comment Share on other sites More sharing options...
Zigzag Vending Posted August 13, 2016 Share Posted August 13, 2016 They recommend spraying armor-all into the plastic bit and then pressing down and turning in one direction, dont shimmy back and forth. Ive never worked with a brand new vendstar but all the used ones ive had went together perfectly using this method. Link to comment Share on other sites More sharing options...
dwr136135 Posted August 14, 2016 Author Share Posted August 14, 2016 Zigzag, thanks for the response, I'll definitely give it a try! Thanks again Sent from my LGLS740 using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.