Jump to content

Need help with lock ID...


tevans62

Recommended Posts

I need some help in identifying the lock needed to work on my sticker vend machine. The pic below shows the end part that screws onto the end of the lock itself. I believe it's a barrel lock that is needed. I bought a used machine that already had the lock missing, but the end piece was still in the machine itself. It is the type that would be a continuous turn lock. Any help would be appreciated, especially where to purchase one.

post-11538-0-51425400-1472243341_thumb.jpg

post-11538-0-42948800-1472243350_thumb.jpg

Link to comment
Share on other sites

Allstar machines and others used those. they are extensions that screw on the back of a standard cam lock, the set screw is what keeps it from unscrewing. I think maybe brand used them maybe the old Penninsula machines and I have seen them on the cash doors of some spirals

Link to comment
Share on other sites

Cut a piece of 1/4" all thread about an 1" long. Put it in the end and tighten the set screw. A standard 1/4" lock will then fit the sticker machine. I do all mine that way. You may have to shorten or lengthen the all thread to fit exactly right.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...