Firetad4 Posted February 6, 2017 Share Posted February 6, 2017 I have a Dixie Narco DN501E-MC I had it on location that appears to have lost its memory all the price settings went to $99.95. I went to reprogram it and when I push the blue program button on the circuit board nothing happens. Any ideas or solutions??? Link to comment Share on other sites More sharing options...
CajunCandy Posted February 6, 2017 Share Posted February 6, 2017 Needs a new battery. Link to comment Share on other sites More sharing options...
AZVendor Posted February 6, 2017 Share Posted February 6, 2017 If pressing the logic board mode button doesn't result in HD or any message on the display then you either have a door switch stuck in the vend mode or it's bad, or you have a bad logic board. Check you door switch first. Link to comment Share on other sites More sharing options...
Firetad4 Posted February 8, 2017 Author Share Posted February 8, 2017 Where is the battery located? AZ do you have a logic board available? How much? Link to comment Share on other sites More sharing options...
AZVendor Posted February 8, 2017 Share Posted February 8, 2017 149 exchange. Link to comment Share on other sites More sharing options...
Firetad4 Posted February 20, 2017 Author Share Posted February 20, 2017 Hey AZ, I think I'm gonna need that logic board. I've got everything working except when it loses power all prices are lost. Upon my research through here that would indicate a bad battery on the board which cannot be replaced, is this correct? Link to comment Share on other sites More sharing options...
lacanteen Posted February 20, 2017 Share Posted February 20, 2017 Battery is held in place with hot glue. It is a standard CR2032 available literally anywhere batteries are sold. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.