JJVend Posted February 24, 2017 Share Posted February 24, 2017 I have a lektro vs-99 series 2 giving me some issues. First off, c6, d6, and e6 are all not functioning. I replaced the motors thinking it was a jam, with no success. It says "make another selection" when you try to vend those rows. Also, recently, same machine the coin mech is no longer giving back change, the computer states .75 change for instance and nothing happens. Can I replace the current 9300 series 24 volt coin mech with a 117v model 6000 mars coin mech? Thanks in advance! Link to comment Share on other sites More sharing options...
AZVendor Posted February 25, 2017 Share Posted February 25, 2017 No, you need to keep the same voltage coin mech in it. If you don't have one you can email me at rbepic4gatgmaildotcom for a replacement. The motor problem could be a cabinet harness issue or a bad logic board. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.