JJVend Posted February 27, 2017 Share Posted February 27, 2017 I have a conlux ccm5g that is not dropping coins into the cash box, it just fills up the tube until it they start going sideways up the recurve and jams. Is there something I can do to program it myself to drop coins into the box? It's operational so I would hate to send it out for nothing thank you! Link to comment Share on other sites More sharing options...
AngryChris Posted February 27, 2017 Share Posted February 27, 2017 Well, if it's doing that, then it sounds like it's not operational. I don't know those coin mechs too well but most mechs have top sensors that tell the coin mech when it's full. If yours isn't stopping when it's full and diverting coins to the coin box, then it probably needs repaired. Link to comment Share on other sites More sharing options...
lacanteen Posted February 27, 2017 Share Posted February 27, 2017 Remove the cassette, then shoot compressed air, preferably 90 PSI, around the black flippers that are behind the cassette at the top. Most Conlux failures are dust & dirt. After this, empty the cassette and try 1 of each coin to be sure it's being correctly routed to the right tube. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.