Chard Posted March 25, 2017 Share Posted March 25, 2017 I've got a National 148 on location and I'd like to put a bill validator with a full sized mask through the face of the machine. Will it work? Do I just need to removed the plastic fact that the snack bezel fits through currently? I'm installing a card reader in it and won't be out to the location until Tuesday to check it out. Thanks! Link to comment Share on other sites More sharing options...
Technivend Posted March 25, 2017 Share Posted March 25, 2017 The original Snackcenters did not mount the validators flush to the panel. You could use a wider faceplate by trimming the plastic instruction plate but the only way to get the faceplate all the way through requires quite a bit work. Link to comment Share on other sites More sharing options...
Chard Posted March 25, 2017 Author Share Posted March 25, 2017 Ok. I might mount the reader to the face of the machine instead. Thank you for the helpSent from my SGH-M919 using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.