Corvus Corax

I bought 2 high gain antennas from USAtech to try and get a better signal. The G10s uses 2 antennas normally, do I need 2 high gain antennas for each G10s, or one per?

Parlevel has the cable you need, couple a bucks.

Get a seperate soda and snack. Soda i would go with a DN501e, put a shime kit in it so you can do cans or 16.9oz sodas. They are also available at any grocery store, Wal-Mart, or Warehouse store (Sam's Costco, etc.) Snacks I'd start with chips and candy bars. I'd stay away from pastries, they stale too fast. Instead try cookies like Oreos, Nutterbutter, Famous Amos, or Grandma's have good shelf life. AMS, AP Studio, is my preference for snack machines. You can probably get a snack and soda for less than a combo. DON'T BUY NEW. There are so many good used ones available, especially now that all the vendors have full warehouses. Good luck.

Start with a soda machine. Coke and Pepsi are practically giving them away. Everyone's warehouses are full. Make sure you can sell enough sodas, before you get a snack. You can throw some $.50 bulk machines with Pm&m and Skittles in the meantime. If you are selling, pick up a decent MDB snack machine, shouldnt be more than $500. Stay away from combos, you always end up over paying for something that doesnt hold enough product. You can be all in for under $1k plus product cost. It's like dipping you toe in before you drown yourself.

You can always go to 16.9oz bottles. They are available everywhere.

Swap the coin mech, and go from there. There are plenty on EBay, and you won't any new parts for that anyway.

1. Move it to another position and see if the problem follows. 2. Flip the wires and see if that corrects it. 3. Buy another motor.

Personally I feel, wear a mask inside and when you can't social distance. Unless it's a painter's resperator mask or an N95 it's next to useless anyways, so just wear something comfortable. If you are on the front lines get a prescription for hydrochloriquinn (probably spelled wrong) Then just ride it out, it sucks, but it's not likely a death sentence. Getting sick sucks, but starving and homeless sucks more. I also converted some locations to cola, lemon lime, and diet cola. I let them know about shortages and just go with the flow.

Got one of those for free. It was abandoned at a location. I gave it away for twice the price.

55 and older complexes and assisted living are good some very good. Places with 24hr security and a lobby entrance are preferred.

Those are the hard plastic ones.

About a year ago I bought some product pushers. They were simple triangle style with 2 relief holes in each. The are flexible and work on both snack and candy spirals. Now I can't find them anywhere. I can find the same triangle size, but they are hard plastic and don't work on both size spirals. Any assistance is appreciated.

I have a few of the new MEI Talos validators. I have mixed feelings. Much more annoying to program. But I may be a curmudgeon. I only buy MEI validators, I will send my Conlux out for repair, but i don't buy them intentionally.

You could try 3 deep. I only have one 720P out, and it's a Gatorade only machine. I am afraid to touch any settings because once a P starts screwing up, it will take you to a very dark place, which usually ends with it being replaced with a 501E.

Update. Fixed by FM. The next morning it worked as normal.