john2010
-
Posts
10 -
Joined
-
Last visited
john2010's Achievements
Newbie (1/14)
0
Reputation
-
I installed an electrical outlet at the location yesterday and will be installing the machine the end of this week or begining of next. It will be vending 20oz. bottles at $1.50 per bottle. I would be very happy with those numbers Willis even at the lower or middle range. I bought a used Dixie Narco machine in good condition for $800.00. Hopefully I can get my money back in eight months or so with no vandalism. I am in MA. do you mind me asking Willis what you are charging on average for your sodas. Thanks everone for the input.
-
Thanks for the advice. I think I might give it a try and like you said if it does not work after a couple months just move it.
-
The station is in a decent area and I don't expect much vandalism. You mentioned that you pulled a machine because of low volume. Can I ask what that location was doing in volume in terms of total monthly sales? Thanks for the input.
-
I was looking to get some feedback on a service station location that wants me to install a outdoor coke machine. It is a typical station with four pumps on a busy road with two service bays. They had a machine in the past but the owner says he took it out because he is getting older and does not want to deal with it anymore. My thoughts were it is going to be seasonal since I am in MA. Any thoughts would be appreciated.
-
Crane Refreshtron 2 combo not vending
john2010 replied to john2010's topic in Beverage and Food Vending
The machine is loaded with cans and was either fully loaded or partially loaded when the bottom row stopped working with at least 10 cans in each selection. Thank you -
I have a Crane Refreshtron 2 snack soda combo with an 8 can selection that is not vending from the bottom can tray. The upper snack sections are working fine and the first level can selection is also working with all four can selections. All four can selections on the bottom tray are not working at all. The machine is full. I have the manual and read it front to back. It was working fine a few days ago. I was hoping someone might be familiar with this machine and have some suggestions for me. The model # is 4720002. Any help would be appreciated. Thank you