Kalleberg

You are correct - I finally have been able to get some pics as well.... but you beat me to it.... Have 2 pics but it will only allow me to load one at 72dbi. hmmm. Thanks Eric

Sorry but I am not looking for the mylar decals. It is the clear plastic panel on the front of the half cabinet that i need to find if possible.

I was wondering if anyone had any NW/Gabriel 60 Half Cabinet front display panels in decent condition that they would be interested in selling ? Many thanks, Eric

About 7 years ago I put a soda machine in a lower gym in an apartment clubhouse. They are now wanting to remodel and it needs to be moved. The mover I used then is no longer available. So far I've been unable to locate any movers with a stair climber. Naturally, any advice would be greatly appreciated. Thanks

Is there anyone in this group who does soda machine moves (with stairs) in the western St Louis MO (O'Fallon) area ? Or who might have a recommended mover ? Thanks

Many thanks for the confirmation.

I'm trying to assemble an older Northwestern super (?) 80 2inch capsule machine for the first time. In getting it assembled I'm trying to figure out the correct positioning of the springs to prevent multiple capsules from dispensing. What I have so far is in the attached to picture but I'd really appreciate some feedback on if it is correct or not. If you have anything in the way of assembly directions or a parts guide that would be way cool too. Any advice would be very appreciated. Thanks Eric

The feedback is much appreciated. I'm afraid you are probably correct. Thanks

Is there any way to get replacement parts for a metal u turn coin mech? I need to find the spring that holds down the arm to prevent spinning backward. Thanks for any suggestions you might have. Eric

Many thanks for the ideas - much appreciated.

Thanks I'll look into them as an option but was hoping someone might know of a source for screws with no drive in the head if possible. Appreciate the ideas for options though. Thanks again

For the type of machine in the attached pics - I guess you could call it a "globe" - the original type of screws don't have any "drive" so you can't use a phillips or slotted screwdriver with them to open them up and make a mess of the candy on location. Are you saying that you've replaced yours with the screws above - and can they be used with a phillips or slotted screwdriver by a someone who wants free candy or to just make a mess?

Is there any source available for the small machine screws with no slot or drive in the head that are used to attach the clear panel to the metal part of the head on this type of machine? Do you have any idea of what these types of screws are actually called? Many thanks, Eric

Many thanks for the update. Much appreciated.

I believe that there are a number of different 50 cent coin mechs that will work in an Oak Vista/300/450 1" machine. An older Oak style with one top slot but 2 spots in the carrier requiring a small handle twist to insert the coin, a newer style with 2 obvious top slots, an Eagle (are they back/front type slots?) and one by A&A for the PO89 ? Is any one better than the others or a better value? and will "Big Oak" 50 cent mechs work on the smaller Vista type machines? Thanks