Jump to content
Please Login

cvending

SUPPORTER
 View Profile  See their activity

  • Posts

    1,219

  • Joined

  • Last visited

  • Days Won

    43

cvending last won the day on March 26

cvending had the most liked content!

3 Followers

About cvending

Profile Information

  • State
    Ohio
  • Vending Type
    Full Line
  • Vending Since
    1972

Recent Profile Visitors

2,277 profile views

cvending's Achievements

Rising Star

Rising Star (9/14)

  • Reacting Well Rare
  • Very Popular Rare
  • Conversation Starter
  • Dedicated Rare
  • First Post

Recent Badges

255

Reputation

  1. cvending started following Wittern 3505 door hinges adjustment? , Reasonable Priced Box or Pick-up Trucks Rentals in Columbus Ohio , AP 213 coffee mch not dispensing cups? and 7 others
  2. cvending
    I use a F150 w/ 8ft bed and Tommy Gate. Godd for moving 2 machines at a time. For larger moves we use Penske Rentals. Las t 2 m oves were in a 18 ft truck and a 26 ft truck with 4 ft lift gate. Moves were both under 100 miles and both cost less than $150 including mileage, plus fuel.
  3. cvending
    My earlier post was to determine if the cup empty switch was being held closed. If it thinks it is out of cups it will not vend that size cup.
  4. cvending
    Does it try to dispense the cup? Does the cup motor run at all? Was it working previously?
  5. cvending
    It sounds like the vend drop sensors are not working. It does not see the item deliver si it keeps trying to vend and then marks that selection empty.
  6. cvending
    aires, you will want to use the 300 note stacker/bill box as the 500 will be too deep to fit in alotted space.
  7. cvending
    make sure they are the correct size. 12 oz cans won't work with 8.4 oz shims
  8. cvending
    You will also need a set of mounting brackets
  9. cvending
    Since it is now coin only I would suggest adding a CC reader. That way you willalso be able to add some higher priced items such as Monster or C4. Plus you will be able to track your sales by item.
  10. cvending
    Are you plsanning on visiting each machine every night to change over the payments system?
  11. cvending
    Check the door switch. If it is bad the compressor will not turn on
  12. cvending
    I would first check out the door switch with a meter.
  13. cvending
    It sounds like you lost the connection to the shelf. I have not seen that machine before. Is it a revision door upgrade on an older machine? If so, what door or board is it? The door hinges really trhrow me off
  14. cvending
    We have had issues with tose. The bolts that fasten the bottom hinge plate became loose. When tightening be careful to not over tighten. They will strip out fairly easily. Also check alignment of the cage nut assembly. Once door is out of alignment, the T-handle does not align properly and can bend the houising bracket that holds the cage nut.
  15. cvending
    D&S Vending has them.... https://www.dsvendinginc.com/p-1337-d13900003-ap-117-volt-transformer.aspx
  16. cvending
    There may be asset tags on the machine by which the bottlers track their equipment. There shoiuld also be mfg. data plates on the hinge side of the door. Serial number will be on them. Call your local bottler and ask them if they have them on their books.
×
×
  • Create New...