VPDXNW Posted July 21, 2016 Share Posted July 21, 2016 #1 VPDXNW Posted June 28 2016 - 10:45 AM Add your text here BASIC 25 posts 0 warning points 0 LIKES State:Oregon Vending Type:Full Line Vending Since:2013 My technician has rebuilt a National 145 machine that we removed from location after it had been vandalized. However, we cannot close the door without these parts. Here are the parts needed from the original manual. If anyone has a 145 that is being used for parts, we are looking for these, and would be happy to work out a payment. We have not been able to find them locally so far. Thanks, Rob 66 Spacer, Cup 1302289 ACTIVE 1 67 Lock Bar and Stud Assembly - L.H. 1452018 ACTIVE 1 68 Actuator Lock Bar - L.H. 1452013 ACTIVE 1 69 Catch, Door Latch 3112195 ACTIVE 1 70 Shield, Latch 1302326 ACTIVE 1 attaching part Link to comment Share on other sites More sharing options...
SCOTT1963 Posted July 21, 2016 Share Posted July 21, 2016 The Spacer part # is now AP420144 and it is available new The lockbar part # is now GPL1452018 and it is available new The actuator is obsolete The catch part # is now GPL3112195 and available new The latch shield is #GPL1302326 and available new Could get the actuator off a scrap machine for you Link to comment Share on other sites More sharing options...
VPDXNW Posted July 22, 2016 Author Share Posted July 22, 2016 The Spacer part # is now AP420144 and it is available new The lockbar part # is now GPL1452018 and it is available new The actuator is obsolete The catch part # is now GPL3112195 and available new The latch shield is #GPL1302326 and available new Could get the actuator off a scrap machine for you Thanks, Scott! Would you be able to get all of the parts off a scrap machine? I want to make this as inexpensive as possible. The bill acceptor kit already has me in deeper than I wanted to be! Link to comment Share on other sites More sharing options...
SCOTT1963 Posted July 22, 2016 Share Posted July 22, 2016 VPD, AZVENDOR may be able to get those used. Our production dictates that we consume most of our used parts, especially on 145 machines. I get trying to keep costs down for sure. We have the new parts, except for the actuator, if AZ can't fix you up. Link to comment Share on other sites More sharing options...
lacanteen Posted July 22, 2016 Share Posted July 22, 2016 I just got in a 146 that will be sent to death row. It will probably cost more to ship due to the length of the lock bar than the parts are worth. Email me at: george@louisianacanteen.com We can work out a fair arrangement Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.