AngelCity Posted November 3, 2016 Share Posted November 3, 2016 I just purchased a Vendo 475 and one of the buttons is broken. I purchased a new button, and was hoping maybe someone could explain how to replace it. I have an idea, but I'm a rookie and don't want to make things worse because I'm too cheap to pay someone to do it for me.... I believe if I remove the spring tab looking thing on the right side, I might be able to slide the old button out and new one in...??? Not too sure any help is appreciated!!! Link to comment Share on other sites More sharing options...
AZVendor Posted November 3, 2016 Share Posted November 3, 2016 You have to remove the phillips screws that hold both the right and left button springs in place. They are called springs but they are just spring loaded, if you will. Once they are both removed then the button will come out. It can be a real tight fit to get a screwdriver up under the springs due to the button below but just keep at it. The springs are what push the button back out and they are probably made of metal though newer ones are plastic only. Link to comment Share on other sites More sharing options...
AZVendor Posted November 3, 2016 Share Posted November 3, 2016 P.S.: That's one of the ugliest avatars I've ever seen. Link to comment Share on other sites More sharing options...
AngelCity Posted November 3, 2016 Author Share Posted November 3, 2016 Thanks much appreciated! Thats Samrai Cop! One of the best worst movies of all time! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.