Jump to content

Set Price on a MDB Coin changer


lionvending

Recommended Posts

There should be a decal on the inner door, the full manual is here:

http://vendiscuss.net/index.php?/files/file/116-dixie-narco-s2d-programming-2-button-pepsigeneric/

 

Press the mode button 1 time to display "HD"

Press buttons 1&2 at the same time until you see "SP"

If the whole machine is to be 1 price, push button 1 and hold, the current price will appear and start scrolling up or down. To change the direction, release the button for a second, then hold again. When it gets to your price let go of the button. To lock in the whole machine at that price press and hold buttons 3 & 4 for 10 seconds.

To set other buttons to a different price, use the above procedure for that button but don't press & hold 3&4. Each button can have it's own price.

Link to comment
Share on other sites

  • 4 weeks later...

No no no no.  DO NOT pull the door switch out if you want to enter the service mode and programming.  Just open the door and the switch plunger will release and THEN you press the mode button.  Only pull out the door switch if you want to simulate being in the vend mode while the door is open for testing purposes.  Mike, too much beer already?

Link to comment
Share on other sites

You don't need to pull the metal cover, the service mode button is along the bottom.  Push the button one time and use the front LCD display and the selection buttons.  There should be a cheat sheet posted on the inner door, or pull down the manual from the link that LACanteen posted.  Good luck!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...