nrod7 Posted February 4, 2017 Share Posted February 4, 2017 This machine has a Coinco Dollar bill validator BA30A and a Mars TRC 6800 H coin mech. The DBV is flashing blocked bill path. The Coin mech will not take change I have spare parts. I have also inserted both a DBV and a coin mech from a working machine, and then the working parts will not work. What else should I check on the Vendo 475? nrod7 Link to comment Share on other sites More sharing options...
AZVendor Posted February 4, 2017 Share Posted February 4, 2017 Do not replace more than one part at a time. If you're getting a false bill path error then you need to rebuild the validator. Put another BA30/50B or Mag30/50B in and it should work fine. Email me if you need a replacement at rbepic4gatgmaildotcom. Link to comment Share on other sites More sharing options...
nrod7 Posted February 5, 2017 Author Share Posted February 5, 2017 Replace only one part at a time. Have the validator rebuilt or replace with a working validator. Got it. Thanks AZ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.