vender4321 Posted April 17, 2017 Share Posted April 17, 2017 Hi. I can't get my Mei series 2000 to take 5 dollar bills. I flipped the switch to on. What else needs to be set. I have a Mei cf700 coin mech in there. It's a AP STUDIO 2D machine. Thanks Link to comment Share on other sites More sharing options...
AngryChris Posted April 17, 2017 Share Posted April 17, 2017 It might not be setup to take 2008 $5's. Some can be upgraded and some cannot. It could also need to be repaired. That's all I can tell you unless you know it's a flash port model. Link to comment Share on other sites More sharing options...
AZVendor Posted April 17, 2017 Share Posted April 17, 2017 Does it say it's a flashport model or is there a red dot over the i in the MEI label? If not then it's probably not flashable to new currency. If you do need it flashed you can send it to me to be flashed. Rbepic4gatgmaildotcom Link to comment Share on other sites More sharing options...
vender4321 Posted April 19, 2017 Author Share Posted April 19, 2017 this is mech..... should this be able to take new 5s? Link to comment Share on other sites More sharing options...
hoosier9601 Posted April 19, 2017 Share Posted April 19, 2017 Make sure there is not a setting in the programming on the machine you need to change. Happened to me recently. Link to comment Share on other sites More sharing options...
SCOTT1963 Posted April 19, 2017 Share Posted April 19, 2017 Thats from March 2005 i believe so it is a flashport Should be written on the white rubber on the lower wedge Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.