Jump to content

Oak gum wheel. Vending 2 or more


Coal River Vending

Recommended Posts

That looks like an Eagle capsule wheel. It won't work correctly with gumballs. The gumballs will pinch/jam & misvend against that plastic part covering the chute. You need a 2 spring brush housing and it should work correctly. You can order it from Eagle or Oak or Ebay.

Link to comment
Share on other sites

5 hours ago, Coal River Vending said:

 

0aba899b199663c9ddcc7432902f1775.jpgf22d4c5928a9fd2dbf9b687b8723a729.jpg1b74d8bb6c6be21fc0b79f0f36e3807a.jpg

 

What am I doing wrong? Timing? You can shake knob and will let them fall as well.

 

 

Sent from my iPhone using Tapatalk

 

Your brush is installed upside down. 

Link to comment
Share on other sites

That is an Eagle capsule brush housing. You really should use a double spring brush (doesn't have that plastic part covering the chute) housing. The gumballs (850s) have a tendency to jam on that plastic piece covering the chute when you are turning the handle. It is especially bad when the unit is more than half full. It will make the wheel jump causing mis-vends. You can get the double spring housing from Eagle, Oak or ebay.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...