Grantamato Posted May 12, 2017 Share Posted May 12, 2017 I just bought the bulk candy route, and I also got a bunch of spare machines and racks that have some rust. What methods do you do to get rid of the rust? And how do you clean your machines on location? Link to comment Share on other sites More sharing options...
Bravo Duck Posted May 13, 2017 Share Posted May 13, 2017 It's a lot easier to cover up rust with paint. Get all loose rust off with a wire brush or sanding disk, thoroughly clean with alcohol, then paint with a rust covering paint. Rustoleum safety red matches Northwesterns, Rustoleum semi gloss professional black works well for stands. Link to comment Share on other sites More sharing options...
parrotthead Posted May 13, 2017 Share Posted May 13, 2017 You can use prep and etch to stop them from rusting from home depot $15 in the paint dept Link to comment Share on other sites More sharing options...
sweetstop Posted May 16, 2017 Share Posted May 16, 2017 Navel jelly works good $6-7 bottle little gores a long way i use it on all my stand repaints Link to comment Share on other sites More sharing options...
Boris Posted May 16, 2017 Share Posted May 16, 2017 Steel wool or drill w/ a wire brush attachment. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.