Coal River Vending Posted June 6, 2017 Share Posted June 6, 2017 Doesn't work. No idea of which models to buy and which harness. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
rodney69 Posted June 6, 2017 Share Posted June 6, 2017 Not sue what model you'll need, but you'll need to know the voltage or match up what came out of it. Link to comment Share on other sites More sharing options...
AZVendor Posted June 7, 2017 Share Posted June 7, 2017 If you aren't using anything other than the 9 pin connector and your machine can't disable the bill acceptance (as in a correct change situation) then you can use an MEI gaming validator like the VN2300 mounted as a downstacker, I believe. This is an "always enabled" validator. The GL5 is 110v by the way so you need the 2300. Link to comment Share on other sites More sharing options...
falls Posted June 7, 2017 Share Posted June 7, 2017 2 hours ago, AZVendor said: The GL5 is 110v by the way I don't know anything about this bill acceptor, but the manual says there are both a 115V and a 24V version. 24 V uses pins 5&6 for power, 115 V uses pins 4&6. Link to comment Share on other sites More sharing options...
Coal River Vending Posted June 22, 2017 Author Share Posted June 22, 2017 Still haven't replaced. Any suggestions?Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.