zjtaylor Posted June 30, 2017 Share Posted June 30, 2017 Money is going in and no gumballs are coming out. The problem only seems apparent when the machine is full. Its like after awhile the mech starts skipping teeth on the carousel gear. The mech will turn all the way around but the carousel won't move. I tried adjusting the springs. Didn't fix it. What's going on? Link to comment Share on other sites More sharing options...
rodney69 Posted July 1, 2017 Share Posted July 1, 2017 Is the wheel all chewed up our worn down where the mech meets the wheel? Link to comment Share on other sites More sharing options...
zjtaylor Posted July 4, 2017 Author Share Posted July 4, 2017 Not really. I guess it must be the wheel though. It just feels different... weaker when compared beside a machine that's good. Link to comment Share on other sites More sharing options...
gumball guy Posted July 4, 2017 Share Posted July 4, 2017 On 6/30/2017 at 0:21 PM, zjtaylor said: Money is going in and no gumballs are coming out. The problem only seems apparent when the machine is full. Its like after awhile the mech starts skipping teeth on the carousel gear. The mech will turn all the way around but the carousel won't move. I tried adjusting the springs. Didn't fix it. What's going on? Just a thought. Check the gear on the coin mech that actually turns the product wheel. There is usually a screw in the center of it that holds it in place. If it comes loose then the coin mech will spin but the coin mech gear won't turn thus the product wheel won't turn either resulting in no product coming out when you turn the mech. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.