Mr Ed Posted July 14, 2017 Share Posted July 14, 2017 I am having some odd problems with a few DN501Es .. they seem to take coins fine but then when i open the machines i find coins scattered around under and on top of the coin drop box..customers say they occasionally insert coins and they do not register so i assume these are those coins.. the coin chute is in great shape and i can see no reason for coins to just randomly go astray....any ideas on what may be causing this? Link to comment Share on other sites More sharing options...
QuikVend Posted July 14, 2017 Share Posted July 14, 2017 Check to make sure everything is perfectly aligned and make sure your coin mech is installed tightly. I've had a loose fitting coin mech that was doing something similar. Also had a coin chute that was off just a hair that would make coins miss the coin box. You can also just run some coins through it with the door open to see what's going on as well. Link to comment Share on other sites More sharing options...
darkinthepark Posted July 15, 2017 Share Posted July 15, 2017 Check the coin deflector at the end of the coin chute. Sometimes they need adjustment. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.