putrevus Posted July 17, 2017 Share Posted July 17, 2017 Hi All , thanks for your help in advance. I have a bev max three where I am having this error "X homing failure error." Thanks again for all your help. Link to comment Share on other sites More sharing options...
lacanteen Posted July 17, 2017 Share Posted July 17, 2017 That's your left/right motion. The motor is on the bottom right, The home switch is top left. Manually move the X axis a foot to the right, then close monetary door. The carriage should home. Link to comment Share on other sites More sharing options...
putrevus Posted July 18, 2017 Author Share Posted July 18, 2017 That's your left/right motion. The motor is on the bottom right, The home switch is top left. Manually move the X axis a foot to the right, then close monetary door. The carriage should home. Thanks a lot for your help. I went there and saw a Coke bottle next to the carriage, once I removed and moved manually to the left and did a test vend it started vending fine.Coke bottles were in E1 so is it possible that it double vended and therefore one bottle was left there .Thanks again.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
AngryChris Posted July 18, 2017 Share Posted July 18, 2017 The coke bottles are problematic for older bevmaxes if you ask me... they are slightly too tall and they graze the top of the next shelf. If,the slides and gates aren't perfect, you'll get bottles falling. I took coke bottles out and put cans in. Link to comment Share on other sites More sharing options...
putrevus Posted July 18, 2017 Author Share Posted July 18, 2017 The coke bottles are problematic for older bevmaxes if you ask me... they are slightly too tall and they graze the top of the next shelf. If,the slides and gates aren't perfect, you'll get bottles falling. I took coke bottles out and put cans in.These are 16 oz bottles they are smaller than 20 oz bottles and they are comfortably going under the shelves with lot of room to spare.I put taller icy bottles on top shelf. I removed that selection itself out.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
AngryChris Posted July 18, 2017 Share Posted July 18, 2017 16.9 oz coke and 20 oz coke are the same height. Just an FYI. But hey, if they fit then good. Link to comment Share on other sites More sharing options...
putrevus Posted July 18, 2017 Author Share Posted July 18, 2017 16.9 oz coke and 20 oz coke are the same height. Just an FYI. But hey, if they fit then good.Hi thanks for your reply .These are 16 oz not 16.9 they are at least an inch smaller than both 20 and 16.9 oz bottles.I just compared all three. 16 , 16.9 and 20 oz .Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
AngryChris Posted July 18, 2017 Share Posted July 18, 2017 Oh okay. I didn't even know they made 16 oz bottles! Link to comment Share on other sites More sharing options...
putrevus Posted July 18, 2017 Author Share Posted July 18, 2017 10 hours ago, AngryChris said: Oh okay. I didn't even know they made 16 oz bottles! Coke does it and it is cheaper than 20 oz or even 16.9 oz and they deliver it too. Link to comment Share on other sites More sharing options...
AngryChris Posted July 18, 2017 Share Posted July 18, 2017 Is it the same diameter as 20 oz? Link to comment Share on other sites More sharing options...
putrevus Posted July 19, 2017 Author Share Posted July 19, 2017 17 hours ago, AngryChris said: Is it the same diameter as 20 oz? there are little smaller but I am able to vend them without any changes in vendos and royal 660s Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.