google.com, pub-6262331124919164, DIRECT, f08c47fec0942fa0 Jump to content
[[Template core/front/profile/profileHeader is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]

Community Reputation

7 LIKES

About Gamvend

  • Rank
    Add your text here

Recent Profile Visitors

350 profile views
  1. I had the same problem with this machine. I called AMS tech support and they were very helpful. Make sure the reflectors and optical things are clean and free of debris inside the vend bin. i only have 1 of these machines and I dealt with this about a year ago but, I remember AMS walking me through a menu like AZ is mentioning to make sure there is a strong enough optic between the sensors. What I ended up having to do was removing one of the "reflectors" on one of the sides of the bin that had 2 together. I remember that doing this increased some sort of "optic number" that needed to be increased for this machine to function properly. I haven't had this problem since.
  2. Hi, I have a AP studio 3 snack machine that has a couple selections on the top shelf that do not vend properly. I swapped trays around to diagnose and found the issue is with the position rather then the motors or harness. I believe the issue is with the connection the tray is making with the receptical in the back wall of the machine. Is there a trick to fix this on this particular machine? I know that with some national machine you can stick cardboard or something behind it? I unscrewed the bracket that hold the receptical and tried to adjust it and it worked for a little bit but then went back to not making a good connection. I appreciate any help. Thanks
  3. I agree with everyone. I have an off campus housing account for college students that does about $500 / week during the school season and about $450 of that is through cashless transactions. I think at least doubling your sales at this type of location would be very possible with the readers.
  4. Ok thanks for the responses. I appreciate it.
  5. I have a few snack machines that do not have a dex connection that I am able to get cash sales data on just by using the MDB data. Is there something about this particular machine or control board that doesn't allow that?
  6. Hi Guys, I am trying to get an LCM 2 snack to transmit sales and inventory information to my VMS ( Parlevel). This machine does not have DEX but, I have other snack machines that I have transmit basic sales data through MDB. I've been back and forth with both USAT and Parlevel and neither has really had an answer. It seems as the only data USAT is getting is CC sales. Does anyone have any suggestions or solutions. Thanks for your your help, Justin
  7. I think my original post was poorly worded. It’s just a snack machine. It’s not connected to a Frozen slave or anything. When I used the term frozen I meant that the machine “freezes” because once this happens it becomes in-operational. Sorry for the confusion.
  8. Ok, thanks AZ. I appreciate your response. I’m going to change the light bulb to an LED replacement and keep my fingers crossed. The other problems seem much more complicated or, unfortunately, beyond our control. It’s a 24 inch bulb right?
  9. Hello, I have an AP123 that works pretty well except that every once in a while it freezes up. What happens it that it seems to get stuck on a selection. The screen will display that selection and it will just be frozen on the display and it will disable all payment systems and nothing on the keypad will work. If I turn the machine off and back on again it’s fine again and goes back to normal operation. Has this ever happened to you guys? Board? Keypad? Bill validator? Thanks in advance for your responses
  10. Hi, We have our first frozen food machine. I am going through it and testing the selections. Off the bat when I select A1 or A2 the vacuum does not turn on however when I select A3 the vacuum does turn on ? Any idea what could cause this? Thanks, Justin Sent from my iPhone using Tapatalk
  11. 1074680 I think it's this one Sent from my iPhone using Tapatalk
  12. Thanks for the responses.I was leaning towards the Gemini wasn't sure which one. I don't have to many bottle accounts so I'll go with the jr. that's the one I'll go with. Keep up posted on how that Cosco one works out for you. Sent from my iPhone using Tapatalk
  13. Do you use the Jr or the sr? Sent from my iPhone using Tapatalk
  14. First I apologize because I'm sure this topic has been covered but I could not find any threads on the search feature. So for years I used a hand truck that I got from harbor freight it was a 1 position upright had truck. It worked ok but, I also didn't have that many accounts. As my business grew I realized that it was heavy and that a 2 position dolly was much better. No matter what dolly I have bought I have found them to be poor quality in that they come apart at the welds even with much less weight then they say they can handle. I have finally resigned myself to the fact that I am actually going to have to spend some $$ and get a good hand truck. So magliner is the first one that comes to mind. My question is what kind of hand truck do you guys use? What ones would you suggest? What should I stay away from? Thanks, Justin
×
×
  • Create New...