, pub-6262331124919164, DIRECT, f08c47fec0942fa0 Jump to content
[[Template core/front/profile/profileHeader is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]

AZVendor last won the day on September 14

AZVendor had the most liked content!

Community Reputation


About AZVendor

  • Rank
    Add your text here

Profile Information

  • State
  • Vending Type
    Full Line
  • Vending Since

Recent Profile Visitors

6,528 profile views
  1. Tobacco vending is outlawed in just about every state and there are no more hot food machines around any longer. You might be asking about refrigerated food that gets heated up but those machines are loss leaders. If you do frozen food you can make a little money by putting ice cream in and being frozen, you won't have many stales but you will have to eat what doesn't sell well so you can try other items. Why are you considering these two types of vending? Do you like to be the underdog that will lose?
  2. It stopped before the cam notch so it wasn't coasting.
  3. Your rotor is in upside down and if you changed the switch was it new? Your rotor looks like the motor ran without stopping and timed out. That or you didn't put a new switch on but a used one, or the rotor is bent. Can you post a link to a video of it running?
  4. It is possible that a dead battery could cause the loss of STS but I'm not certain of that. You probably will find that most settings will remain. The prices are the most volatile since they are the one item most likely to be changed by the user.
  5. With no experience with them, an immediate breaker trip is probably a bad relay board but it could be some 110v short as well. Also, since it's an import, if it's the first time you've ever plugged it in, is it maybe set for 240v operation? You could also disconnect the tank heater and see if it still trips but the heater probably isn't supposed to come on that soon anyway, leading to the relay board being the culprit.
  6. You should try three deep first and see if it still has the issue. Also make sure the column clips are set for small package vending and that the depths are programmed properly for each columns.
  7. You have to ask a question to get any wisdom.
  8. That is a National machine and all you have to do it flex the bottom tab of the yellow retainer toward you which then allows you to lift the spiral and retainer off the motor shaft.
  9. There is no door switch on an LCM unless the aftermarket board kit included one.
  10. Loose connections can cause all kinds of issues. Just find someone who can resolder it for you and it should work fine again. Heck, you can do it yourself.
  11. Repairing them yourself is how you guarantee another repair is needed shortly after. Find a reliable rebuilder or a Coinco repair depot to get them fixed correctly and completely.
  12. Do you have a vend sensor on the delivery bin? If so then the board may be set to stop the motor upon the sensor triggering.
  13. The display pinouts on the logic board probably need to be resoldered. It's very common for them to come loose.
  14. Live Life, this should be a new post so that more people see it. Tacking it onto an unrelated post doesn't help anything for you.
  • Create New...