Search the Community
Showing results for tags 'merchant media'.
Found 2 results
I have a 472 with the on-board cashless bezel. It will not accept card payment and this is what I did. 1. I checked the RSSi # and it -63 (25 bars) 2. I check to see if the machine recognizes the on-board cashless (Yes) 3. I checked all the settings and made sure the bill acceptor and coin mech didn't have a malfunction 4. I unplugged and plugged in all the wires on the main board. 5. I replaced the cashless bezel with a brand new one and nothing. anyone have any ideas?
Big ups! ...seems as if my business model mutates or morphs every so often. Gotta keep the mind fresh, the motivation high & the ambition strong! I've been setting out USi combo II (3155B & 3516 models), Bevmax 4, and Merchant 6 models for the past couple of years. The USi combo II models are no longer in production, but i've been picking them up off of CL. My current focus of account type is office building common areas, although i will set other account types too if they appeal to me. I currently run 55 accounts by myself (that's been about my average for the last 10 years), so there's not much room for growth. If a prospective account comes up and i want it, i'll close out my smallest or least desirable account on the route, usually passing it on to another fellow vendor. In new accounts, i'll set a Bevmax 4 along with a Merchant 6. If the numbers for the account don't appear to hit my gross sales target zone for a Merchant / Bevmax set-up, $200+/ week, then i'll pair up a 3155B and Bevmax. I only put bottled soft drinks, no cans, in the Bevmax, along with lots of different types of beverages...juices, energy drinks, cold coffee products, teas, water & flavored water. The 3155B is a true 3 wide snack machine conjoined with a 312 can or 156 bottle beverage section. I usually stock it with can drinks in order to relieve the Bevmax of product demand and depletion. On the snack side of the 3155B, i replace the factory stock 8 count chip augers with 10 & 15 count. Shelf A i leave the 8 ct. spirals for LSS size chips & large vend products. Shelf B i replace all selections with 10 ct. Shelf C i replace all with 10 ct. Shelf D i replace all with 15 ct. Shelves E, F and G are left with the factory augers. I've been putting USAT c.c. readers on all machines that i set out. I've got some accounts that barely use the readers, and some that hammer them. It's definitely the point and click generation, the youngsters, that's pulling out the plastic! I've got most of my machines equipped with Mars 7512i coin mechs w/ dollar coins and either Currenza SMV-4117 bill acceptors or Coinco BP4SX valis. I've got them set to accept $1-$20. I like the hypnotic appeal of the Currenza's blue cascading lights along with the sequential flashing blue lights on the c.c. reader. I don't have any recyclers and i don't plan on using them. I feel that technology is advancing so quickly, sooner than later it's gonna be mainly credit / debit cards and mobile wallet purchases. I do have miscellaneous mechs & valis on the route, but over time i'll phase those out. I've been using a Mercedes Sprinter van for my route vehicle for the last year and it's a huge difference (space-wise) compared to my Chevy Express 3/4 ton van. With my Chevy van, i had to dig and move things to find stuff. I thought i would eliminate all of that with a bigger vehicle, but seems as if whenever i get more space, i want to stuff it with more product too! And so i'm still digging and bending, twisting & turning! And through a lot more stuff! There are some accounts on my route that have parking garages that i could drive into with my Chevy van but not with my Sprinter. So now i gotta stand out in the rain when, before, i was shielded from the elements. It was nice to be able to re-arrange the day's run and go to the parking garage accounts on rainy days. But with all of that said, i love the Sprinter van! Anyone have any experience with the Crane Merchant Media? Is it comparable to the Merchant 6? Cheers to your business!...