gumball guy Posted February 23, 2012 Share Posted February 23, 2012 I am looking for some replacement rubber anti skid plugs for my 1-800/T-Pico metal stands and was wondering if anyone here had an idea where I could find some. It is basically a small black rubber plug that is about 5/8 of an inch wide on the bottom and 3/8 of an inch on the top. It has a small "waist/channel" in between and you just push it up through the hole in the bottom of the stand and it snaps into place. There are four holes on the bottom of the metal stands (around the perimeter) where these go to prevent the machine from sliding on the floor. I can probably fabricate something else but I figured I would ask around on here first. Thanks. Link to comment Share on other sites More sharing options...
dperry Posted February 23, 2012 Share Posted February 23, 2012 I've found that Lowes has a lot of specialty hardware items in the fasteners section. They have drawers and drawers of things that might work for you. They even have a small amount of electronics parts, like knife switches and piezo buzzers. That's not what you are looking for, I know, but it just shows you the variety of things that they do have. Link to comment Share on other sites More sharing options...
JimmyT Posted February 23, 2012 Share Posted February 23, 2012 I was wondering what those 4 holes were for. I thought maybe to bolt down your machine so people can't steal it haha. I'm gonna check out Lowes, I hate the scrapping noise the base makes as you move it around. Thanks u guys Link to comment Share on other sites More sharing options...
redfleet32 Posted February 24, 2012 Share Posted February 24, 2012 Thats funny JimmyT I always thought the same thing you did. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.