Jump to content

Coin mech dispenses coins as soon as change is inserted


duhema24

Recommended Posts

I have a dixie narco 501 with coinco mech. When change is inserted into mech it sorts the change in the right spot but seconds later it dispenses the coin. Have taken mech apart but unsure of problem. Any help would be great.

Link to comment
Share on other sites

well it would be helpful to isolate whether it is a mech problem or a machine problem. i have had a similar but

not the exact same problem it turned out to be the mech was bad, but could easily have been a bad board.

what model of board is in it siid or mpc?

my first thought would be replace it with a new mech and see if that resolves the issue.

Link to comment
Share on other sites

  • 2 weeks later...

Does the machine accept the full vend price and then eject those coins? If it does and has a sIID control board then my guess is that you may have blown the middle fuse in the top right hand corner of the board. I believe that it is a 1.6 amp fuse. They recommend changing it out with a 6 amp fuse. In most cases that solves the problem.

Repairman Mike

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...