havending Posted May 11, 2013 Share Posted May 11, 2013 I have had people wanting to know about 1.00 vends on the chicken. We had one we tested at 1.00 with finger lights in it. It is a shared location with a SV rack and sticker machine on 6 weeks it did 475.00. 400 was ones it has a 500 stacker Link to comment Share on other sites More sharing options...
antoniocinisi Posted May 11, 2013 Share Posted May 11, 2013 I- WISH THERE WAS A WAY YOU COULD PROVE THIS!! Link to comment Share on other sites More sharing options...
Toad Posted May 11, 2013 Share Posted May 11, 2013 Your gonna have to just buy one to find out Link to comment Share on other sites More sharing options...
ronsidney Posted May 11, 2013 Share Posted May 11, 2013 Thats great! when you get the finger lights did you have to cap each one yourself? or does somebody sell diffrent eggs with straight run toys in them rather than just the junk mix you get from a&a? or did you just use caps and not eggs?? ron Link to comment Share on other sites More sharing options...
havending Posted May 11, 2013 Author Share Posted May 11, 2013 Just the lights in caps from cardinal Link to comment Share on other sites More sharing options...
Toad Posted May 11, 2013 Share Posted May 11, 2013 So your using it as a $2,000 single capsule machine? Link to comment Share on other sites More sharing options...
havending Posted May 11, 2013 Author Share Posted May 11, 2013 I- WISH THERE WAS A WAY YOU COULD PROVE THIS!! If I go by the office today I can copy the location sheet. It was already dropped off for audit. Seeing how I'm spending thousands of dollars to test the machine in different locations you should thank me and not doubt Link to comment Share on other sites More sharing options...
sherlock Posted May 11, 2013 Share Posted May 11, 2013 If I go by the office today I can copy the location sheet. It was already dropped off for audit. Seeing how I'm spending thousands of dollars to test the machine in different locations you should thank me and not doubt I would like to thank you for sharing. But, I also suggest you don't take it so personally that anyone is asking for proof. Asking for someone to take any business info on faith is asking for a lot. Remember the old saying, "Trust, but verify". So what if some are less thankful than others? The act of helping others should be it's own reward in any genuine act of kindness. But again...I would like to take the time to say "Thanks for sharing your experiences". And I'm sure I'm not alone in my sentiment among TVF members. Please keep sharing willingly. Link to comment Share on other sites More sharing options...
antoniocinisi Posted May 11, 2013 Share Posted May 11, 2013 thats right I read it on the internet ,it must be true Link to comment Share on other sites More sharing options...
Frank Posted May 11, 2013 Share Posted May 11, 2013 Ya, I don't believe this either... prove it to me also,, if its true, I am going to raise the price..lol Link to comment Share on other sites More sharing options...
havending Posted May 11, 2013 Author Share Posted May 11, 2013 thats right I read it on the internet ,it must be true When you come to Atlanta for nbva in June you can spend a couple days hanging on a route with me if you would like. I have done this with friends of mine and got some great ideas Link to comment Share on other sites More sharing options...
musser Posted May 11, 2013 Share Posted May 11, 2013 You have convinced me enough to test it for myself Havend. Truthfully however it was Frank that reached out to me. I think that says a lot. I have had a couple of great conversations with Frank. Frank asked me point blank if I would try a machine and told me literally " all I ask is you tell the truth good or bad". You cant get better than that from a supplier and I told him that I would be as unbiased and fair as I can. I will let you know. Link to comment Share on other sites More sharing options...
havending Posted May 12, 2013 Author Share Posted May 12, 2013 You have convinced me enough to test it for myself Havend. Truthfully however it was Frank that reached out to me. I think that says a lot. I have had a couple of great conversations with Frank. Frank asked me point blank if I would try a machine and told me literally " all I ask is you tell the truth good or bad". You cant get better than that from a supplier and I told him that I would be as unbiased and fair as I can. I will let you know. Frank is the real deal. He is one of us (an operator) he is willing to help anyone of us be a success. Link to comment Share on other sites More sharing options...
antoniocinisi Posted May 12, 2013 Share Posted May 12, 2013 You have convinced me enough to test it for myself Havend. Truthfully however it was Frank that reached out to me. I think that says a lot. I have had a couple of great conversations with Frank. Frank asked me point blank if I would try a machine and told me literally " all I ask is you tell the truth good or bad". You cant get better than that from a supplier and I told him that I would be as unbiased and fair as I can. I will let you know. how many are you getting ?I am considering one or two as well Link to comment Share on other sites More sharing options...
Rick Falcon Posted May 12, 2013 Share Posted May 12, 2013 I have had people wanting to know about 1.00 vends on the chicken. We had one we tested at 1.00 with finger lights in it. It is a shared location with a SV rack and sticker machine on 6 weeks it did 475.00. 400 was ones it has a 500 stacker What kind of location is this Hav? The two that I own one is in a laundromat and the other one is in a Chinese buffet. Link to comment Share on other sites More sharing options...
havending Posted May 12, 2013 Author Share Posted May 12, 2013 Super china buffet in TN Link to comment Share on other sites More sharing options...
Rick Falcon Posted May 12, 2013 Share Posted May 12, 2013 Just the lights in caps from cardinal I was thinking of something amongs those lines but I want to try it with a live display. Link to comment Share on other sites More sharing options...
havending Posted May 12, 2013 Author Share Posted May 12, 2013 You can tape a display in the door Link to comment Share on other sites More sharing options...
Nick505 Posted May 12, 2013 Share Posted May 12, 2013 You can tape a display in the door So is this what you are doing? Do you use a display? Link to comment Share on other sites More sharing options...
adog Posted May 12, 2013 Share Posted May 12, 2013 If you use it in that manner you got a expensive Bulk vending machine with a DBA and some attraction and new looks to attract kids to put a dollar in your machine. Not a bad idea though. What about if you mixed a bunch of high end one dollar capsules? Laser rings, yoyo balls, buildables, etc.?Wonder how that would work? Not sure if it would look good with a few displays on the glass? But they could see in and see the variety! Link to comment Share on other sites More sharing options...
Rick Falcon Posted May 12, 2013 Share Posted May 12, 2013 If you use it in that manner you got a expensive Bulk vending machine with a DBA and some attraction and new looks to attract kids to put a dollar in your machine. Not a bad idea though. What about if you mixed a bunch of high end one dollar capsules? Laser rings, yoyo balls, buildables, etc.?Wonder how that would work? Not sure if it would look good with a few displays on the glass? But they could see in and see the variety! I like that idea adog,sure it could be done. In the next few days I will be reaching out to Frank to see if something could be done as far as adding a live display without having to tape it onto the glass and running the chance of the display falling. Link to comment Share on other sites More sharing options...
havending Posted May 12, 2013 Author Share Posted May 12, 2013 So is this what you are doing? Do you use a display? I did that helped sales Link to comment Share on other sites More sharing options...
adog Posted May 12, 2013 Share Posted May 12, 2013 Yeah I don't have one yet but just am thinking outside of the box!!! Maybe someday I will try it. Business isn't quite big enough yet though! Link to comment Share on other sites More sharing options...
Nick505 Posted May 12, 2013 Share Posted May 12, 2013 Hmm I am moving mine this coming week. Maybe I will give that a try. Link to comment Share on other sites More sharing options...
Action Vending Posted May 13, 2013 Share Posted May 13, 2013 Just use a display holder out of a nw 80 or big oak and hang it over the glass on the inside. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.