ondeckdean Posted May 15, 2013 Share Posted May 15, 2013 I replaced a cam and when I test it... The first vend nothing, second vend nothing, then on the 3rd vend all three cans fall. I know this is an easy fix. Who can help? Link to comment Share on other sites More sharing options...
AZVendor Posted May 15, 2013 Share Posted May 15, 2013 This is caused by your rotor in the column being 180 degrees off. If you pulled the motor off, then this means you put it back together with the rotor upside down. It sounds like you have Vendo 601. If you didn't pull the motor off, then you installed the motor cam 180 degrees out. Link to comment Share on other sites More sharing options...
ondeckdean Posted May 25, 2013 Author Share Posted May 25, 2013 This is caused by your rotor in the column being 180 degrees off. If you pulled the motor off, then this means you put it back together with the rotor upside down. It sounds like you have Vendo 601. If you didn't pull the motor off, then you installed the motor cam 180 degrees out. Thanks AZV, works perfectly now and I owe it all to you! Link to comment Share on other sites More sharing options...
caserri Posted May 26, 2013 Share Posted May 26, 2013 Glad AZ could help! Be sure to thank him with a "like" on his post. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.