Kyleking520 Posted June 11, 2013 Posted June 11, 2013 I know I know, I have read all the lousy reviews about my machine and how horrible they are. I need some help if anyone has a broken one of these or maybe a wiring diagram that would be helpful. I recently got a g0-127 and the wiring from the mother board to the beverage machine had the connector cut off. If you can help that would be awesome, Thanks for your time
CajunCandy Posted June 11, 2013 Posted June 11, 2013 I'm going to be honest with you. The wires for these machines is so fine and delicate it is almost impossible to splice a connection back on. You would have to fine a wire harness on fleabay or fine one for very cheap to fix what you have now. mike yes, I do own one of these cheap china made pos!
Kyleking520 Posted June 11, 2013 Author Posted June 11, 2013 The wiring is not the problem I can splice and re connect the wires and the 20 pin connector is pretty widely used and very common (found it at my local electronics store). I just need to know where the wires go into the harness from the three separate plugs in the mother board that make up the connector
CajunCandy Posted June 11, 2013 Posted June 11, 2013 Well if you can wait a few days I will take a picture of mother board on mine and post them. mike
Kyleking520 Posted June 11, 2013 Author Posted June 11, 2013 That would be really helpful. I just need pics of the harness exploded into the 3 individule smaller connectors on the mother board and where they run into the 20 pin connector. You would have to remove it and unwrap the wires cause there is literally 3 or 4 sets of the same color and size wire im pretty sure that one set from each plug that goes into the motherboard
CajunCandy Posted June 16, 2013 Posted June 16, 2013 I know I know, I have read all the lousy reviews about my machine and how horrible they are. I need some help if anyone has a broken one of these or maybe a wiring diagram that would be helpful. I recently got a g0-127 and the wiring from the mother board to the beverage machine had the connector cut off. If you can help that would be awesome, Thanks for your time The location would not tear apart the machine to get pictures. I found this on flea-bay. http://www.ebay.com/itm/Genesis-Combo-Vending-Machine-Snack-And-Candy-Harness-Motor-/290929589983?pt=LH_DefaultDomain_0&hash=item43bcc13edf This might help you.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.