Vendo 540 not vending gatorade correctly

[executivevending]

It will dispense nothing, then the next time it vends 2. The settings are the same exact thing as water and tea bottles that i vend and they vend fine. I took a couple pics but having trouble uploading them

[AZVendor]

Your gage bar, under the column needs to be in the left hand holes in the front and rear stacks with a grey clip on the bar next to where the bar changes its level.  You will use no side spacers inside the column and you will set the motor cam to #2.  Set your rear spacer 5 notches from the back.  Make sure you can still get a couple of fingers between the front bottle and the sold out paddle with the bottles pushed against the rear spacer.  If you have it set up this way already, then you may have a bent gage bar or your rotor is installed 180 degrees out of time. 

[executivevending]

Thank you. I just went and fixed it, the gage bar wasn't in the left hole that's all it was. Thanks again. Learning everything as it happens