Walta Posted July 18, 2013 Posted July 18, 2013 Dixe gen3 glass front let the magic smoke out. The cup would not move. I turned off power. With a small screw driver tried to pry out the fuse but got sparks. The fuse is good. When I power up the CPU and Q1 smoked. The Y board is off its holder and may have touched ground. Do you think the board was bad before I worked in it? Please do not use the correct model name in your reply. Walta
AZVendor Posted July 18, 2013 Posted July 18, 2013 The main cpu may have blown if the Y board grounded out first. I'm surprised with power off that you had voltage at the fuse. Is there a capacitor in the fuse circuit? It probably needs both the main cpu and the Y board replaced. As you know, if you only do one and the other is bad it can take out the new board again.
Walta Posted July 18, 2013 Author Posted July 18, 2013 I did not see any active components on the Y board it is only 20 bucks but likely 14 day to get it from National. Walta
Recommended Posts
Archived
This topic is now archived and is closed to further replies.