snack dude Posted August 30, 2013 Share Posted August 30, 2013 I have a 2501 that the LED is flashing 4 times. According to the back of the bill stacker it means "Cross channel Blocked". I have taken this thing apart and cleaned it and checked the belts and still get 4 flashes. Is there something I am missing, could this be a coin mech problem and what is a cross channel anyway? Or is it time for this to be refurbed. Thanks Link to comment Share on other sites More sharing options...
AZVendor Posted August 30, 2013 Share Posted August 30, 2013 Yes, it needs to be repaired. The LED lens in the bottom of the validator is likely cracked on one or both ends. I can exchange if for you if you don't have a local repair depot. Just shoot me a PM. Link to comment Share on other sites More sharing options...
snack dude Posted August 30, 2013 Author Share Posted August 30, 2013 Thanks for the reply and the offer, I do not need it at this time, I bought two old vendos that a guy just wanted to get out of his garage and was just going to junk out and I am just checking them out to see if anything works and if they are worth resurrecting or just parts. So far parts is winning Link to comment Share on other sites More sharing options...
orsd Posted August 30, 2013 Share Posted August 30, 2013 still keep the bill val, as you can use them as exchange units to get a discount when buying from people like azvendor Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.