MarkJeff Posted October 2, 2013 Share Posted October 2, 2013 Hi Everyone I have an old Vendo Super Stack http://www.vendoco.com/Documents/Super%20Stack%20Service_WHOLE.pdf The machine is in bad shape so I want to by pass everything and fire the 3rd vend motor directly because it's the only part of the machine that I know is working. Any idea's on how I can accomplish this? Thanks Mark Link to comment Share on other sites More sharing options...
rmorris1953 Posted October 2, 2013 Share Posted October 2, 2013 On credit relay pull wires 10 and 71. I have not done this in a long time but maybe someone else can remember. Then you reinsert I think 71 in place of 10. Tape 10 up and leave it out. Or it could be 10 in place of 71. This will make the vendor free vend on all columns by just pushing the select button. Make sure to unplug vendor when doing this. 110 volts present. Sent from my GT-P3113 using Tapatalk 4 Link to comment Share on other sites More sharing options...
AZVendor Posted October 2, 2013 Share Posted October 2, 2013 You can use this method to install a push button on the front of your door to set a free vend. After you set the free vend you can then press any selection button to vend a soda. But why bother if you only have one column working? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.