Jump to content

Mars 6200 not accepting any coins


Mvalentine6705

Recommended Posts

Hi, I have a Mars 6200 in a Dixie Narco vender. All of a sudden the use exact change light came on and will no longer accept any coins. I purchased a "working" 6800h on Ebay to replace it once installed the exact change light goes out but it too will not accept any coins. Any suggestions other then learning and tuning?

Link to comment
Share on other sites

You probably have a motor that is stuck or not in the home position.  Home position is when of the two switch arms on each motor, the short one will be in the notch of the plastic motor timing cam and the longer arm will be on the high side of the cam.  Each motor should always stop in this postion.  If one hasn't then that is causing the rejection of all coins as it will cause an open vend circuit.  The underlying cause can be a bad motor brake, bad motor or bad motor switch.  PM me if you need any of those parts.  PS: you're lucky if the Fleabay coin mech you got is good.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...