nightsfire Posted March 13, 2015 Share Posted March 13, 2015 i just got a new machine in really good shape but i do not know the model as plate has been removed Link to comment Share on other sites More sharing options...
AZVendor Posted March 13, 2015 Share Posted March 13, 2015 That looks like it might be a DN 414 based on the delivery port and the number of buttons. 9 buttons means 10 columns in the machine when using a Coke door. Since it's 79" tall that would make it a DN414 and it looks to be single price. Link to comment Share on other sites More sharing options...
nightsfire Posted March 13, 2015 Author Share Posted March 13, 2015 Worth 200$? it's super clean insidr Link to comment Share on other sites More sharing options...
AZVendor Posted March 14, 2015 Share Posted March 14, 2015 It certainly worth $200 even if it might need some repairs. Just make sure it is cooling by having them plug it in for two hours before you see it. Link to comment Share on other sites More sharing options...
jim lee Posted March 15, 2015 Share Posted March 15, 2015 i just got a new machine in really good shape but i do not know the model as plate has been removed Ya gotta' wonder what goes through some people's heads. Did he wake up one morning and think, "Today is going to be a great day. I'm finally going to pull the data plate out of that Coke machine!" -jim lee Link to comment Share on other sites More sharing options...
orsd Posted March 15, 2015 Share Posted March 15, 2015 Either a thief or more likely teens hangin round with nothing to do round the coke vendor ripped it off for shits and giggles Link to comment Share on other sites More sharing options...
AZVendor Posted March 15, 2015 Share Posted March 15, 2015 It's very common for the serial number plate to be removed when some people rebuild machines. I think it's just to make it difficult for the new owner to figure out what they have so that they have to call the seller when they need something for it. There's a guy here who does that to every machine he sells. I hate it because even though I always know what I'm working on, sometimes you need the serial number to get the correct version of part for one. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.