brydrumman2000 Posted March 28, 2015 Share Posted March 28, 2015 Hi, I'm new to this forum. I have a Toy Taxi claw machine by Coast to Coast entertainment. I bought it used for 400 bucks non working. Now I got everything to work except for the trolley moving front and back. Resistor run on the board is roasted and I can't find a schematic. What would cause this to blow and why won't the trolley money front and back. Also, does anyone know what resistor value run is? I would appreciate any help, thanks. Link to comment Share on other sites More sharing options...
caserri Posted March 29, 2015 Share Posted March 29, 2015 I'm not sure if this will help but here is the the toy taxi manual... http://vendiscuss.net/index.php?/files/file/57-toy-taxi-crane-manual/ Welcome to TVF! Link to comment Share on other sites More sharing options...
brydrumman2000 Posted March 29, 2015 Author Share Posted March 29, 2015 Thanks, but I'm looking for more of a schematic or an alternative board to use. I can afford to dish out 375 for a c2c board. Link to comment Share on other sites More sharing options...
Billnuts Posted March 31, 2015 Share Posted March 31, 2015 There is no schematics they wont release them the only way to fix it is to have a working board and pull the values of the components from the other board Photos of another board would have to be of super high resolutions to get those values. Link to comment Share on other sites More sharing options...
havending Posted March 31, 2015 Share Posted March 31, 2015 That board new is 400 Link to comment Share on other sites More sharing options...
brydrumman2000 Posted March 31, 2015 Author Share Posted March 31, 2015 I switched it with a feioli board from my candy crane. I was able go find out that the motor was shorted. Everything works now except r40 gets pretty hot. I replaced it with 1k ohm 1/2 watt. This is what cnc said to use. Shou this resistor run hot or no? Link to comment Share on other sites More sharing options...
Toad Posted March 31, 2015 Share Posted March 31, 2015 If he dont want to spend $375, then $400 is out of question! Link to comment Share on other sites More sharing options...
TWvend Posted April 1, 2015 Share Posted April 1, 2015 Respectfully, if you want to dance to the music.....you have to pay the piper . Link to comment Share on other sites More sharing options...
Billnuts Posted April 1, 2015 Share Posted April 1, 2015 I switched it with a feioli board from my candy crane. I was able go find out that the motor was shorted. Everything works now except r40 gets pretty hot. I replaced it with 1k ohm 1/2 watt. This is what cnc said to use. Shou this resistor run hot or no? better be careful feioli and coast to coast models vary and some use different motor voltages if i am not mistaken Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.