J and T Vending Posted April 5, 2015 Share Posted April 5, 2015 http://www.ebay.com/itm/Coke-machine-/271819216570? Perhaps USI CD8 model 3037... Link to comment Share on other sites More sharing options...
AZVendor Posted April 5, 2015 Share Posted April 5, 2015 That is a USI CD8 serpentine machine which is cans only. It's multi price which won't help much with cans but looks nicer than a single price. It also has a Maka validator which will need to be upgraded when it craps out. The current bit is cheap so good luck with it. If it needs a new validator you can PM me. Link to comment Share on other sites More sharing options...
AngryChris Posted April 5, 2015 Share Posted April 5, 2015 Definitely a cd8. I'm not sure about the actual model number. They are okay but still inferior to Dixie's or royals Link to comment Share on other sites More sharing options...
J and T Vending Posted April 5, 2015 Author Share Posted April 5, 2015 Thought so, was just looking online for machines near my area and was just curious. Thanks for the feedback. Link to comment Share on other sites More sharing options...
Georgia bulldog Posted April 14, 2015 Share Posted April 14, 2015 We called this machine a mini 8 I have 3 they work good the only problem is the front on all these machine crack on bottom.. I am a big fan of USI mini 8 cd 8 and cd 10. I wish they were still in production. If you notice on the picture of the machine it does not show the bottom of the front I would almost bet you it is cracked. Link to comment Share on other sites More sharing options...
J and T Vending Posted April 14, 2015 Author Share Posted April 14, 2015 The machine Iooked like it was in good condition from pictures. I had a couple questions for the seller but they never replied to my email. If seller would have responded in time, I would have bidded. Link to comment Share on other sites More sharing options...
J and T Vending Posted April 16, 2015 Author Share Posted April 16, 2015 What about these drink machines, see attachment below. I know they are dixie Narco but not sure of the models. https://nashville.craigslist.org/bfs/4978807842.html Link to comment Share on other sites More sharing options...
AngryChris Posted April 16, 2015 Share Posted April 16, 2015 Well the first pop machine looks like a 6-select royal can machine. I'm not really good at identifying older Royals or Vendos but it looks to be mulitprice and probably have a pretty low capacity but still a good machine. The snack machine is definitely a USI snack machine with about 19 selections. I'm not going to call it a GF-19 but it's an older model and I normally wouldn't recommend someone buying one of those models BUT it appears to have what looks like a Mars VFM validator in it and that would be excellent news if it's true. The third machine looks to be a Dixie Narco 276 single-price can machine with a Coinco BA30B in it. This is a good machine but low capacity. Overall... $750 is a fair price for all 3. Link to comment Share on other sites More sharing options...
orsd Posted April 16, 2015 Share Posted April 16, 2015 #2 is an OOOLLLD usi 2xxx snack, in fact, its so old they dont even make tuffronts for them. Link to comment Share on other sites More sharing options...
AngryChris Posted April 16, 2015 Share Posted April 16, 2015 #2 is an OOOLLLD usi 2xxx snack, in fact, its so old they dont even make tuffronts for them. I'm fairly certain this machine is newer than a 3015 series, but not any better. I'm just too lazy to look it up. Link to comment Share on other sites More sharing options...
orsd Posted April 16, 2015 Share Posted April 16, 2015 looks ike a hack retrofit of electronic display,,, Link to comment Share on other sites More sharing options...
moondog Posted April 16, 2015 Share Posted April 16, 2015 What about these drink machines, see attachment below. I know they are dixie Narco but not sure of the models. https://nashville.craigslist.org/bfs/4978807842.html While I can't argue with the price, the catch 22 here is that no decent account would want those machines on site. Link to comment Share on other sites More sharing options...
J and T Vending Posted April 17, 2015 Author Share Posted April 17, 2015 I know these are older machines, but I was thinking for the price I figured they would be good for tire shop or small warehouse facility. Waiting on seller to provide pictures of inside machine. However these machines are 2 hours from where I am located. Dependent upon inside pictures, I may hold off to find something closer or perhaps a little newer. Link to comment Share on other sites More sharing options...
orsd Posted April 17, 2015 Share Posted April 17, 2015 While I can't argue with the price, the catch 22 here is that no decent account would want those machines on site. I know these are older machines, but I was thinking for the price I figured they would be good for tire shop or small warehouse facility. Waiting on seller to provide pictures of inside machine. However these machines are 2 hours from where I am located. Dependent upon inside pictures, I may hold off to find something closer or perhaps a little newer. aAge isnt the issue, its size- their too small Ive seen a bunch of single price dixies at a hightschhol account i week back. Link to comment Share on other sites More sharing options...
J and T Vending Posted April 17, 2015 Author Share Posted April 17, 2015 True, but some locations only have limited space for smaller machines, Link to comment Share on other sites More sharing options...
J and T Vending Posted April 17, 2015 Author Share Posted April 17, 2015 Last but not least, I found dixie narco 501e near my area in EBay. However they are sold as is as some are missing Bill validator and some are missing coin mechs. Overall they look like they at in great condition. Thoughts, see link below. What is average price for coin mech and/or dollar bill validator? http://m.ebay.com/itm/281663775117?_mwBanner=1&ul_ref=http%3A%2F%2Frover.ebay.com%3A80%2Frover%2F0%2Fe11051.m43.l1123%2F7%3Feuid%3Dad4f57f821734985a244d24b52244585%26loc%3Dhttp%253A%252F%252Fcgi.ebay.com%252Fws%252FeBayISAPI.dll%253FViewItem%2526item%253D281663775117%2526ssPageName%253DADME%253AX%253ARTQ%253AUS%253A1123%26srcrot%3De11051.m43.l1123%26rvr_id%3D0 Link to comment Share on other sites More sharing options...
AZVendor Posted April 17, 2015 Share Posted April 17, 2015 That is a real good deal for 501E's and you should get as many as you think you'll need. You might be able to work a better deal for multiples. They have an odd 7UP door that I've not seen before. The live display is preferred by a lot of vendors and new signs can be installed for generic graphics if needed. You can PM me for any coin mechs and validators you might need, or any other parts needed to complete them. Good luck and good find! Link to comment Share on other sites More sharing options...
moondog Posted April 17, 2015 Share Posted April 17, 2015 Last but not least, I found dixie narco 501e near my area in EBay. However they are sold as is as some are missing Bill validator and some are missing coin mechs. Overall they look like they at in great condition. Thoughts, see link below. What is average price for coin mech and/or dollar bill validator? http://m.ebay.com/itm/281663775117?_mwBanner=1&ul_ref=http%3A%2F%2Frover.ebay.com%3A80%2Frover%2F0%2Fe11051.m43.l1123%2F7%3Feuid%3Dad4f57f821734985a244d24b52244585%26loc%3Dhttp%253A%252F%252Fcgi.ebay.com%252Fws%252FeBayISAPI.dll%253FViewItem%2526item%253D281663775117%2526ssPageName%253DADME%253AX%253ARTQ%253AUS%253A1123%26srcrot%3De11051.m43.l1123%26rvr_id%3D0 Probably the best one you've found - at that price I'd be more worried about the cooling deck than the coin mech and validator - it's always good to have a fresh pair of those in the machines when you place them anyway. You can usually find refurbed coin mechs in the $100 range and validators for about $175 if you don't have a core exchange. If it's close to you I'd make arrangements to check them out when you go to pick it up and choose the one you want, preferably one that works Link to comment Share on other sites More sharing options...
J and T Vending Posted April 17, 2015 Author Share Posted April 17, 2015 Ok so received more information on machines. These machines are actually at a remanufacturing company thy is well known in state of Alabama which is about an hour from where I am located. However they have not been tested. Company states they sell excess machines as is with option for refurb if needed. I will make plans to go by there next week. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.