Jump to content

DN 522E Shims


laip51

Recommended Posts

I am setting up a 522E. Bottles are 2 deep and cans 3 deep. All works well but cans drop 2 at a time. Manual shows parts and part numbers but doesn't say how many each side for cans. Bottles vend ok. Reference is made to Service Bullitin 247 and 282 but don't have.  Can someone advise the proper shimming for cans. Thanks. 

Link to comment
Share on other sites

This is a T model, not an E model.  To do cans 3 deep in any of the wide columns you will need two ribbed plastic shims on each side of the column.  Use  green and gold cams on the motor and set the gold cam to hole number 2.  Set your rear spacer in holes 22 counting from the front of the machine, top and bottom, right and left.  Let me know if you need the parts and I can ship them.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...