Jump to content

Seeking Vending Machine Programming Guidance or Manual


 Share

Recommended Posts

Hello!

We recently received a Polyvend pv-2210 vending machine and are in the process of transforming it for our nonprofit. We are seeking guidance (or a manual) on how to program the pricing on this type of machine. Any tips would be greatly appreciated. Please see the photos below for reference.

Thank you!

post-10209-0-68079800-1429817137_thumb.jpg

post-10209-0-67479500-1429817156_thumb.jpg

post-10209-0-66249400-1429817160_thumb.jpg

post-10209-0-68176200-1429817165_thumb.jpg

post-10209-0-28506700-1429817470_thumb.jpg

post-10209-0-84501100-1429817473_thumb.jpg

post-10209-0-13690500-1429817476_thumb.jpg

post-10209-0-34013900-1429817479_thumb.jpg

Link to comment
Share on other sites

The circuit board is behind the keypad, integrated together I believe, and there are one or up to three buttons there.  Play with them and one will put you in the service mode.  This is a very basic machine and I think it only does pricing and coin payout.  The other buttons are to pay coins with.  I think one button pays one coin, the other pays the second coin and holding both coin switches together pays the third denomination.  I might still have a manual for it and will look for it but you will not find parts for it if you need any.

 

I should also point out the obvious, that you don't have the plexiglas door that covers the machine and locks down on the front.  What good is this?

Edited by AZVendor
  • Like 1
Link to comment
Share on other sites

  • 3 years later...
On 4/24/2015 at 2:05 PM, AZVendor said:

The circuit board is behind the keypad, integrated together I believe, and there are one or up to three buttons there.  Play with them and one will put you in the service mode.  This is a very basic machine and I think it only does pricing and coin payout.  The other buttons are to pay coins with.  I think one button pays one coin, the other pays the second coin and holding both coin switches together pays the third denomination.  I might still have a manual for it and will look for it but you will not find parts for it if you need any.

 

I should also point out the obvious, that you don't have the plexiglas door that covers the machine and locks down on the front.  What good is this?

dear Friend, can you help me? i buy polyvend pv2210 but there is some electronic problems... can you look for manual?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...