KychrisKy Posted July 27, 2015 Share Posted July 27, 2015 So I go to service a machine today and display is bad, i go mmmmm I had to move a heavy as Pepsi machine out of my way an yea mine is plugged up mmmm So I changed plug locations an nothing mmmmm I check the cord and it had a naked bad place which looks like it came from the leg of the msvhine setting on it So I heard they have been Rocking the machine which therefore it must have shorted the machine out some dumbass people never grow up No I'm having the company review the tapes so I can figure out who did it, I want they to pay Not to mention it could possibly caught Fire Your thoughts Link to comment Share on other sites More sharing options...
moondog Posted July 27, 2015 Share Posted July 27, 2015 So I go to service a machine today and display is bad, i go mmmmm I had to move a heavy as Pepsi machine out of my way an yea mine is plugged up mmmm So I changed plug locations an nothing mmmmm I check the cord and it had a naked bad place which looks like it came from the leg of the msvhine setting on it So I heard they have been Rocking the machine which therefore it must have shorted the machine out some dumbass people never grow up No I'm having the company review the tapes so I can figure out who did it, I want they to pay Not to mention it could possibly caught Fire Your thoughts Grin and bear it - you don't want to be putting your location managers on the spot with the camera deal. As an alternative you can mount your own internal camera, just have a sign stating that the machine is under surveillance. I own a Zetta Z12 battery powered camera which turns on when the machine is shaken - ran me about $80. Link to comment Share on other sites More sharing options...
SchligVend Posted July 27, 2015 Share Posted July 27, 2015 I wouldn't put the manager on the spot like that if it is a workplace, they will usually side with their employee before their vendor.... Unless it is an apartment or a hotel I would just let it go! its part of the business! Link to comment Share on other sites More sharing options...
KychrisKy Posted July 28, 2015 Author Share Posted July 28, 2015 I know it sucks though grown golpher people acting a fool, that's cost that shouldn't be there How do u have the zetta mounted Link to comment Share on other sites More sharing options...
TKK Posted July 28, 2015 Share Posted July 28, 2015 Just tell the location what happened so they know why it wasnt working. U cover the expense. Splice it and use electrical tape, Link to comment Share on other sites More sharing options...
RJT Posted July 28, 2015 Share Posted July 28, 2015 Yep, just part of vending my friend get used to it. Fix it and move on. Link to comment Share on other sites More sharing options...
moondog Posted July 28, 2015 Share Posted July 28, 2015 I know it sucks though grown golpher people acting a fool, that's cost that shouldn't be there How do u have the zetta mounted I use Hook n' Loop taped to the bottom of the top shelf so I can see who's doing it. You can also download the film clip to a disk if you catch somebody. Replace that cord as splicing it will constitute a code violation. Link to comment Share on other sites More sharing options...
Golfdogs Posted July 28, 2015 Share Posted July 28, 2015 I use Hook n' Loop taped to the bottom of the top shelf so I can see who's doing it. You can also download the film clip to a disk if you catch somebody. Replace that cord as splicing it will constitute a code violation. He's in rural Kentucky...there are no code violations! Link to comment Share on other sites More sharing options...
CajunCandy Posted July 28, 2015 Share Posted July 28, 2015 Here in Louisiana, cords can't have any tape on them, or at least I make sure to show safety man for company I have new or good cord on machine. At my former place of employment, OSHA would make there yearly pass through and if any tape was found on any cord providing power to any piece of equipment. That was a fine. Crazy! cajun Link to comment Share on other sites More sharing options...
KychrisKy Posted July 29, 2015 Author Share Posted July 29, 2015 I got a new cord but I think the fuse was blown in front panel, it wasn't pop out but I looked at it and then it pop lol so Im gonna put a new cord n fuse n go from there Fingers crossed Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.