RikaKazak Posted August 2, 2015 Share Posted August 2, 2015 Found a super cheap coin op pool table in near mint condition and was curious how to move it. Do you guys disassemble and reassemble it on location? (That's what wikihow recommended) or do you do another method? I have a custom trailer now with a 1,500 pound winch on front and a metal ramp so I can pull things like keymasters and balloon busters up/in easily. But the pool table doesn't have wheels Link to comment Share on other sites More sharing options...
ronsidney Posted August 2, 2015 Share Posted August 2, 2015 You put on its side on piano/four wheel Dolley and take legs off..then you roll out door.. Strap to Dolley Link to comment Share on other sites More sharing options...
NoRefunds Posted September 1, 2015 Share Posted September 1, 2015 Also, if you're using a four wheel dolly, prop it under the back side of the pool table (opposite the ball view window side) by lifting the table about a foot off the ground and having someone slide the dolly under the table. The dolly will be on its side at that point. It will raise it enough to remove the two feet on that side. Remove dolly, (pool table will be leaning because two feet are on, two feet are off) then lift it onto its side onto the dolly. I hope I explained that well, I know it's a bit tricky to put into words. If you simply lift it onto a dolly you'll bend the two feet on that side. I get countless pool tables in my shop with two bent feet to be replaced. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.