Jump to content

Recommended Posts

"honing" means the machine is trying to home a vend motor most likely due to a jammed column. With the door closed, the decimal point in the credit display will flash indicating a jammed column. Open the door and press the mode switch on the board and if there is a suspected jammed column you will see "JCxx" where xx ins the column number. A bad motor switch or faulty motor brake will cause this same message.

Link to comment
Share on other sites

we have changed main computer in machine as we where told that was the problem machine also says honing is there some other problem we can look for thanks

If you find it's a bad motor switch (often results in unexpected vends or continuous vends) or a motor issue then you can email me at rbepic4gatgmaildotcom for any parts you need to fix it.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...