BlindVending Posted September 18, 2015 Share Posted September 18, 2015 Hey guys can't seem to open any manuals from my cell phone. Have an error on a 167 that says err c. Seems to possibly be a door error as it happens when door is open. Can anyone tell me what this is? Link to comment Share on other sites More sharing options...
AngryChris Posted September 18, 2015 Share Posted September 18, 2015 It might be displaying when the door is open simply because the machine recognizes that the door is open and it's letting you know there is an error. Beyond that, I don't know what that error is Link to comment Share on other sites More sharing options...
AZVendor Posted September 18, 2015 Share Posted September 18, 2015 ERR C means that there is a problem on your C shelf. It might be an individual motor problem or a motor coupling problem (coupling is in the programming). Link to comment Share on other sites More sharing options...
BlindVending Posted September 18, 2015 Author Share Posted September 18, 2015 Yes thanks AZ. One of my selections keeps saying make another selection. Wires are fine so I think it's a bad motor. Link to comment Share on other sites More sharing options...
AZVendor Posted September 18, 2015 Share Posted September 18, 2015 If you need a motor for it you can email me at rbepic4gatgmaildotcom. Link to comment Share on other sites More sharing options...
cvending Posted September 18, 2015 Share Posted September 18, 2015 Did you hit the "code" button on the keypad to reset the stalled motor. That should be home all motors Link to comment Share on other sites More sharing options...
Bvending Posted September 18, 2015 Share Posted September 18, 2015 Have you tried pushing "code" on control pad? I have one and when it gets out of time, says error c or whatever shelf it might be on, I just push "code" and gets the motor back in time Did you hit the "code" button on the keypad to reset the stalled motor. That should be home all motors You beat me to it lol Link to comment Share on other sites More sharing options...
Feral Vending Mechanic Posted September 18, 2015 Share Posted September 18, 2015 167s have a hard wired shelf. It is entirely possible that one of the really thin wires where the shelf connects has broken. If the entire shelf is reading "make another selection" then remove the shelf, unplugging the shelf harness, and examine the connection. Link to comment Share on other sites More sharing options...
BlindVending Posted September 19, 2015 Author Share Posted September 19, 2015 Will try the code button. Thanks guys. Feral it is just 1 individual selection. The rest of the tray works fine. I took tray off and checked all connections and seems fine Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.